亚洲精品久久久狠狠狠爱_99久久这里只有精品_久久久久一_久久黄大片_黄色一级毛片免费看_黑人毛片基地

Faulty

Possible reasons

Motor cannot move

1. Power is disconnected
2. Motor winding is disconnected
3. Overload
4. Starter or controller have bad contact or open circuit
5.Brush and collector ring have bad contact
6. Voltage is too low

Motor can move, but it fails to load

1. Setting value for overload protect is too low
2. Rotor bar or winding sealing off or breakage
3.Δ connected winding is misconnected as Y
4. Overload is too low

Motor overheat

1. Overload
2. Voltage is too low
3. Voltage is too high
4. Δ connected winding is misconnected as Y
5 Y connected winding is misconnected as Δ
6. Bad ventilation

Bearing overheat

1. Bearing wear
2. Insufficient lubricating grease
3. Too much grease
4. Misaligned axial line
5. Grease hardening

Spark jumping between brush and collector ring

1. Overload
2. Poor brush quality
3. Brush is clamped in brush-holder
4. Brush curvature is not conform to collector ring
5. Incorrect brush pressure
6. Rough or oil stained collector ring surface
7. Collector ring surface tracking
8. Coaxiality of collector ring is not good